The Premium WheelTracker The WheelTracker is manufactured out of about 93 percent stainless steel and it is used to test the wearability and water damage potential of asphalt mixes. By simulating...
UTGE Series Water Baths are used in various material testing analyses. 15 , 24 and 48 lt. tank capacity models are available and can be ordered with or without cooler...
4" and 6" paper discs prevent hot-mix asphalt samples from sticking to baseplates or compaction heads in Marshall or Superpave Gyratory Compaction Molds. The discs are 0.007-0.008in thick and made of 100lb paper stock and meet ASTM...
Marshall Compactor, Automatic, Rotating Base, Double 4in Molds compacts two 4in (102mm) asphalt specimens simultaneously in rotating-base molds. Tapered-foot hammers and rotating base plates produce a consistent kneading action during compaction....
Marshall Compactor, Automatic, Heavy-Duty Rotating 4in Mold compacts a 4in (102 mm) asphalt specimen into a rotating-base mold and can easily be adapted to compact 6in (152mm) samples with a Hammer...
Core Retrieval Tongs Long-handled, easy-to-use tool for 4in (102mm) or 6in (152mm) sizes remove cores from asphalt or concrete surfaces. Simply insert blades into space from the core drill bit, grasp the core...
The UTCM-0930 Vibrating Machine is used for the preparation and compaction of 70.7 mm mortar cube specimens. The mould table is mounted on four springs attached to an eccentric shaft...
The UTAS-0212 Vialit Plate Apparatus is used to assess the adhesion property of aggregates to bitumen. Standards EN 12272-3; NF P98-274-1 Supplied complete with a metal basement with three vertical...
The Vacuum Pyknometers (Yale Pyknometer) are used for determining the theoretical maximum density of compacted or non-compacted bituminous paving mixtures (voidless mass). The Vacuum Pyknometers are used together with a...
UTC-4930.FPR U-Touch PRO Control Unit, designed to control the automatic compression/flexure testing machines for compression, flexure, splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks....
UTC-4930.FPR U-Touch PRO Control Unit, designed to control the automatic compression/flexure testing machines for compression, flexure, splitting tensile strength tests of construction materials such as concrete, cement mortar, masonry units/blocks....
The UTAS-2125 Travelling Beam Device is used to check for any irregularities in both concrete and bituminous road surfaces. Deviation of the surface from a straight-line is shown on a...
UTB-0345 Bitumen Oven is used for determining the loss in mass, of oil and asphaltic / bituminous compounds when heated with the loss on heating test method or the effect...
The UTB-1360 TAG Open Cup Flash Point Tester is used for determination of flash points of. The test set consists of an electric furnace with electronic controller of heating power,...
Non-flammable solvent liquids used for the binder extraction test can be successfully recovered using the Solvent Recovery Unit. The recovery unit consists of two stainless steel chambers, one for the...
Solubility Test Set for bitumen and bituminous binders, EN. Consist of a filter flask, a sintered glass crucible, a funnel, 100g powdered glass, a rubber ring and a rubber stopper....